Feeds:
Posts
Comments

Posts Tagged ‘attack’

A very good tip for attacking players is that “the hips don’t lie” – if a player’s hips are facing a certain direction he/she is vulnerable on the opposite shoulder. Some people call that the ‘soft shoulder’ because it’s going to take that person more time to turn and defend someone on that side, and any contact they make is likely to be soft. Very often, if the attacking player times it right, that person won’t even get turned at all and the attacker will slip by or behind.

Now it’s not my intention to steal this photo, but it shows a perfect example of someone whose hips are turned allowing an attacking player to get behind him.  (It comes from the magnificent analysis work rugby journalist Murray Kinsella does over at the42.ie, specifically this article: click here. Definitely check out his work, which seems to come out about once a week during the rugby season!)

Here, the Australian player (in yellow) is completely exposed on his right side and a simple pass by the Irish player should see his team mate gone!

While it’s true that the hips very rarely do “lie”, and that this should be a basic visual cue your players look for in attack, I also think the eyes can often give you the same sort of information. A good defender will keep hips square with the goal line, and his body aligned with the player he/she’s covering. Players should not get fixed on that person, and scan with the upper body, turning shoulders or just head to assess threats / opportunities and communicate with team mates. (Fighter pilots have a great acronym for this: the OODA loop, developed by military strategist John Boyd, which demands they constantly observe, orient, decide, act so they avoid getting ‘target fixation’ and miss the threat that could kill them.)

But something great attacking players do is draw attention to themselves. Genuine threats with ball in hand make more than just the defender in front take notice, and that extra attention should be seen as a golden opportunity for supporting players to strike. England’s Danny Cipriani explains a bit of that in the clip below, and I love that he goes against the old adage of “running straight”, demonstrably making a sideways run to draw yet another defender’s attention and free up space for someone else.

I contend that any player can be such a threat, so long as they get the ball with enough space to make a sudden threatening move that makes defenders pause and take notice. (Needless to say, keeping the ball in two hands means that player can pass in a split second.) Often, playing too close to the line makes the defence’s work easier because there’s no time for them to consider what else is going on. With enough time between the last phase and taking the ball to the line, defenders can get caught ball-watching. It’s this visual cue that should sound alarm bells to both the ball carrier and support runners that there is a defender (at least!) who’s overly focused on the ball and not paying attention to what’s going on in front.

In this highlight reel from Rugby League, there are two great examples of attackers taking advantage of defenders ball watching and not paying attention to what’s going on in front of them.

Starting at 0:16 and moving to 0:18 you can see how all the defenders have their hips square and their line is flat, but all eyes are on the ball carrier. The next defender out hasn’t noticed that his man is halfway outside him heading for the gap! The ball carrier’s pass is inch-perfect, putting his team mate away for a try.

The second example starts at 2:17. The first receiver has the ball with plenty of space and he starts running sideways. The defenders are pretty much in line with hips square, but yet again all eyes are on the ball carrier. This is the sort of player who is incredibly quick, so people are fixated on what he might do. Defenders should, of course, respect such players, but need to focus on the threats in front of them and trust their team mates inside to make the tackle / call for help and the sweeper (scrum half, full back for us in Union) to get this player if he breaks the line. Instead, they all get caught ball watching and – even worse than the previous example! – the defender who lets the try scorer through really should have had him in his field of vision. It goes to show how fixated on the ball he was that he didn’t see a free running receiver right in front of him!

I like using conditioned small-sided games to practice this. Attackers are given free reign to attack a realistically wide space, but defenders (either by coach’s call or on their own) either align or move in a certain way that would be considered ‘bad defence’. The challenge is for attacking players to spot and exploit bad defence, and not just by putting all the onus on the ball carrier, but by calling out opportunities as soon as they are spotted. These clips show that even at the highest level poor defence happens, and players need to know what that looks like from regular practice. Going back to the fighter pilot example, going back as far as WWII, air crews – and naval personnel for that matter – were trained to recognise the enemy by the shape of their equipment and patterns they employed. Becoming familiar with defenders’ vulnerable shapes and patterns similarly provides rugby players with an edge in attack.

Read Full Post »

Having two layers in attack allows multiple options to use or create space. Referred to as an outlet, a 2nd man play, or a back door option – it gives the attacking team a chance to play both flat and deep runners depending on what the defence offers.

Our typical set-up sees a standard first- and second-receiver staggered as one might see a fly half and inside centre, or two forwards off a ruck. Behind them, ‘C’ can be a support player or a second-receiver if ‘B’s opportunity is shut down. In the diagram below, ‘A’ can pass to ‘B’ running an unders line or ‘C’ running an overs line.

A = passer, B = flat option, C = deep option, S = support player

A = passer, B = flat option, C = deep option, S = support player

This formation is common in Rugby League, with any highlights package showing several examples of it. In the following clip from Japan v Maori All Blacks, you can see the A-B-C formation used in a narrow channel. The runner at ‘B’ cutting in draws one defender out of alignment and the Maori winger has to come in to take care of ‘C’, who passes to his own winger. On the reverse angle you can see clearly how the defenders are turned inward, freeing up just enough space for the wing to race down the touchline.

Here’s another example where Bath use this formation in the midfield, rather than off the first receiver. George Ford could have easily popped the ball to one of the forwards standing close-by, but he played it ‘out the back’ to his full back who sets up the winger for an easy try.

Bath use this move a lot to free up their speedy outside backs, but they have plenty of big runners who hold defenders in the middle because they could just as easily bust through. Everyone must be seen as a potential receiver, and therefore a legitimate ‘threat’ to the defence. A player being ‘a threat’ doesn’t just mean being in position to receive a pass either. Defenders are more likely to be manipulated or exploited when those multiple threats are in motion.

In this try, the inside centre runs an unders line and scores from it because the fly half recognises that the defenders are too focused on the wide and deep options. With each of those players in motion, it becomes really difficult for defenders to adjust. They can’t ignore outside threats and have to trust team mates inside to cover runs against the play and inside passes.

The attacker at ‘B’ doesn’t have to run an unders line either. In this clip, he fades outward suddenly, dragging two defenders and allowing the ‘C’ attacker to run straight through the gap untouched. In the following clip, ‘C’ loops outside of ‘B’.

Finally, it’s important that players around the A-B-C unit get into good support positions to take advantage of the linebreak. They have to look for ‘triggers’ in body language that suggest when to move and where to go. In this clip, the fly half, inside centre and winger create the linebreak, but there would be no try if not for the scrum half and no. 8 funnelling through to keep the move alive.

The A-B-C formation provides a bit of structure with many different options. It’s important for potential receives to be active threats and to communicate their intent. Supporting players must also read body language to adjust their timing and choose appropriate actions. Ultimately, it’s up to decision makers to consider all this information and read the defence to see their reaction, and choose the best option. I can’t stress enough that athletes need to practice this under game-like conditions so they can appropriately attune themselves to the pressure, pace, and congestion they’ll face in a game.

Read Full Post »

One of the simplest ways to break the defensive line and/or create space for supporting team mates is to line up in the gap between defenders. It sounds incredibly basic, but it’s not something you see happen very often. Defenders do tend to adjust and get lined up on the player being marked, so it’s a scenario that isn’t necessarily always going to happen. The following clips, however, show that even at the highest level defenders can lose focus on the big picture. Someone I used to coach with referred to this affliction as ‘ruck inspecting’ – defenders’ heads and shoulders turned inwards looking at the ruck, waiting it for it to come out, virtually ignoring the threat in front of them. Even funnier are those who’ve been conditioned to point and say “I’ve got… ” so-and-so while still looking at the ruck!

One solution to this affliction is to condition players outside the Post defender to stand with their inside foot forward. This makes it difficult to turn shoulders and hips toward the ruck. In such a position, they must use their head to scan the field and once the ball emerges their first step is forward. While ‘ruck inspecting’, the usual first-step is one that squares the body, and then the second step gets them going forward slightly. It’s a crucial step-too-many when the aim should be to seize the initiative and catch the attacking team behind the gain line as soon as possible.

The following clips will show examples of attacking players getting aligned in gaps, exposing defenders who haven’t assessed the situation in front of them until it was too late.

In this clip, Northampton had enough defenders in place, but Gordon D’Arcy cleverly got himself into a gap on the outside of the second-last defender. He seizes the gap brilliantly and finds support with an inside pass. The overhead shot shows his alignment even better as he’s on the inside shoulder of the last defender, creating a 2v1 situation that will allow him to slip through the gap if the last defender stays on his man, or pass if the defender pinches in to cover his team mate’s mistake.

Here’s another showing a player getting a pass into a gap and, though caught, setting up a team mate who also reads the play and times his run perfectly. The creator of this clip does a great job of noting the purpose and shape of the Waratahs’ attack, and I’d add that Beale’s ability to align himself in – and attack – the gap flat is as important as Foley’s ability to get him the ball. Too often, receivers sit back waiting for a pass when the defence isn’t aligned properly and/or not paying attention to the potential threats in front of them. Getting the ball deeper and without a plan allows the defence time to adjust. As the video’s creator so correctly indicates, the defence has a lot of threats to consider but they needed to trust the guys on the inside more and focus on their own responsibilities. Foley’s straight and fast run from a relatively flat position holds his man in place and draws the attention of others. Beale’s flatness and Foley’s near-perfect pass doesn’t give the Reds’ defenders any time to adjust once the point of attack has been changed. If they’d have been more attentive, Beale might have run straight into a dominant tackle, but he’s a master at spotting and exposing defensive errors.

This clip finishes with a perfect strike by Quade Cooper, but off the lineout Ben Tapuai does a great job of running a line that fixes his defender and then steps into the gap to get well over the gain line. This is another basic principle of alignment and attack that must be part of every player’s ‘tool box’. Too often, slow or slanted runs are used that play right into the hands of the defence. Here, Tapuai is deliberate in his approach and explosive in his change of direction. Several direct and powerful phases ensue that gets the Lions defenders focused on tight play off the dangerous scrum half Will Genia and the Reds’ capable forward pack. This is where a fly half like Cooper is at his most deadly. Too many defenders are worried about Genia and the forwards. Cooper patiently waits for them to manipulate and draw the attention of the defence before calling his own number. At about 45:15, you can see him shift to his left and get into a massive gap before getting the ball. The defender on his inside is still looking at the ruck when the ball is passed and finds he’s lost his man. He panics, running to where he he should have been, allowing the light-footed Cooper to step him and score untouched – the ball fake holding the other inside defender brilliantly.

In this clip, we see the same sort of scenario – defenders not properly assessing / aligning with the attacking team – but instead of the receiver having a go, he realises he’s drawn their attention and finds an un-marked supporting runner with a pass. Again, the opportunity comes after a few phases and when defenders are overly-focused on what’s happening around the ruck and not getting properly aligned. The overhead shot shows it even better as Canada has five defenders on the blind side and Piri Weepu at 1st5 is lined up in between two defenders with men on his inside. As he gets the ball, both are not in a good position to defend and both have a go at him, leaving the inside channel completely un-marked. Different than our previous examples, Weepu doesn’t have the clear gap once he gets the ball, but by drawing the attention of panicked defenders, he skilfully puts a team mate into created space.

This is a very simple way of reading and exposing defensive mistakes even before the ball is played. The first visual cue is spotting a defender whose shoulders and hips are turned inwards, looking more at the ruck than what’s in front of them. By lining up in the gap, the attacking player either has a clear door to run through or – and this is the second visual cue – can take advantage of of the defence reacts to the sudden realisation that they’re not properly aligned. If the outside defender stays on his man, his inside shoulder is vulnerable. If he pinches in, a pass to the next player outside is on, and his line can be tight if that pinching defender turns inward. If the poorly aligned defender sprints to get across, then maybe he’s vulnerable to an inward sidestep a la Quade Cooper, or a pass to a supporting runner as in the Weepu to Vito pass versus Canada.

Read Full Post »

Found this great clip from a recent game and shared it with my team, reminding them that it’s not just a great step by Rokoduguni, but he read’s Masi’s body language perfectly as well!

Masi makes the mistake of preparing for the tackle too early, chopping his feet and dropping his butt to take the hit rather than trusting his own ability to continue through and make a more aggressive tackle. He had a good line of pursuit to avoid being stepped on the inside – not to mention having two speedsters like Daly and Varndell there. He’s also a big enough guy to be an imposing figure and make a powerful smothering tackle on the Fijian.

On the reverse angle you can see the opportunity Rokodunguni is presented. Masi begins to slow down quite early – and a tackler doesn’t want to be too fast because a simple sidestep will do the job as the would-be tackler goes past like a missile. He still needed to come forward and remain on the balls of his feet to be able to adjust to the carrier’s changes. Rokodunguni picks the perfect moment to step, just as Masi has dropped his butt and almost gone flat-footed. With his centre of gravity that low, sitting back almost on his heels, it’s not going to be easy – if at all possible – for Masi to change direction.  The Bath winger’s step isn’t even massive and the inward cut probably wasn’t even necessary; he just read Masi’s passive body language and picked the perfect time to change direction.

I don’t really care if defenders go for the big hit or a passive hit – though there are ideal times for each if they are within one’s power/ability. I do, however, maintain that defenders must come forward to deny the ball carrier time and space to think and operate, but to also maintain the initiative and be able to react to sudden changes of direction. It’s a tricky balance that probably differs with each individual, based on their own agility and confidence versus opponents with unique abilities. How fast? When to put on the brakes? How low to get? When?  This tackle tracking and approach situation is something I have my players practising in 1v1s (and 2v2s / 3v3s to work on coordination and communication) every week for a few minutes, often in drill form in a series of small groups to get maximum reps. I don’t even think the tackle aspect is necessary if the final move is a powerful step and shoulder into the midsection/on the hip. Getting into that strong and balanced body position should make the tackle easy.

Read Full Post »

I’m a few days away from my first session with a new team and I’ve been watching, listening, reading and writing sports and coaching for a few weeks now in preparation. My next few posts are going to condense and outline some of this – also building upon my many years of experience – as a resource for those athletes who’d like to read my thoughts. Hopefully coaches who read this blog will also take from it what they find useful.

Attacking Focus

1. Play Head’s Up Rugby (Low structure imposed upon, high assessment and coordination demanded of players.)

a) Seize and exploit the ‘easy opportunity’ (ex. over-lap, gap, strong vs weak, fast vs slow, poor alignment, etc.)

b) Create an opportunity by using a simple move (can be simple as a sudden and sharp change of direction that manipulates the defence and allows support players options, or a multi-option snap play like a loop or a blocker line)

Before the defence re-aligns, look for a new ‘exploitable’ opportunity. This is a simple cycle where some players will be better at scanning and seizing but will have options to create opportunities if nothing easier is immediately apparent (not just from their scanning, but also from team mate feedback!). While I will train everyone to enhance their ability to anticipate and recognise patterns and visual cues, players not so aware can always start from b), using the attacking tool box mentioned in my previous post.

2. Maintain a quick tempo and play to our strengths

Playing in a provincial Premier League means we’ll face very strong and well-coached teams. I expect to especially see strong defending teams as those aspects are typically easier to coach (as seen in the recent Women’s Rugby World Cup!) We are lucky to have plenty of options in terms of speed, power, finesse, and game smarts. In conjunction with playing “head’s up” – and sometimes as a default option when there are no easy opportunities / creative efforts are being shut down – we can proactively and patiently string together phases in a logical way. Dominating the contact area to win quick ball, with good coordination and communication, means we should have a lot of people in good positions to keep the tempo up and prevent the defence from getting properly re-aligned. From this situation, defences break down and get us back to the ‘easy opportunity’ situations. For example, consider how even a 3m penetration with quick ball can catch defenders off side or unsure of who they’re supposed to be covering, or how a few phases in one direction with a wide move in the other could find speedy players against unfit ones. Not only do playmakers need to be aware of these possibilities, but all players should be assessing simple things like “Do I need to go in that ruck, or can I stay here and be part of the next phase?” Little ‘rules’ can be devised which fit the players you have – in our case, we’ll have a lot of options as we have a big tight five, mobile back row, intelligent midfielders and speedy outside backs. The trick will be to play to the ‘best’ strength at a given moment – something we will continually work on in game-like practice.

Important Factors in Achieving This:

  • Awareness – at all times – scanning / communicating / listening (playmakers use info to make decisions)
  • Work-rate – whoever is aligned first has the initiative. In contact, the fewer people needed to win a tackle contest, the more people we have for the next phase.
  • Alignment considered – we need more than one ‘layer’ to ensure we can be proactive, but also reactive (i.e. a strike runner can have a go at space, but if the timing is off or the defence adjusts, we need a ‘back door’ outlet to keep the play alive and not resort to something that’ll lead to slow ball). This means more than getting into good positions. It also means that players have to consider their actions. The two most common: forwards jogging to rucks that are already won to stand beside it doing nothing; backs who run up flat when the play has been halted much further inward to then have to back pedal into a good position to receive the ball on the next phase. To maintain a good tempo with sufficient numbers, players need to be efficient in their alignment (it also saves them from wasting energy where they’re not needed). They should also begin to recognise when the defence is on the back foot (allowing us to play flatter and have a quick go at the line) or on the front foot (maybe forcing us to have a plan to cope with defenders ready to pounce).
  • Ball movement – more than just quality and accuracy, timing of the pass is vital to the success of a move. An early pass gives someone else in a better position the time and space to use it. A late pass should be putting someone into a gap. A pass too early, without threatening the defence, can simply allow defenders to push across and cut off our options. A pass too late can be forward, at the wrong target, too hard or otherwise useless. Two quick passes can get us into more space in a hurry. A dummy pass can get us through a gap in that ‘black hole’ area behind a ruck.
  • Thoughtful running lines – straight running fixes defenders in place and preserves space for team mates. Sharp and sudden changes of angle can exploit space and the ‘soft shoulder’ of the next defender in line. Running too early can get you ahead of the play; too late invites the defence to take space away. Remember that a line can be a great decoy, so make sure not to ‘demand’ the ball when you’ve drawn the attention of two or more defenders. Passers also need to consider this and select a better target.
  • Strategic considerations – What’s the score? What part of the field are we in? What are the conditions like? Can we get enough support there? Can they cover kicks? Are they better/worse than us at the scrum or lineouts? Is it wise to have a shot at goal or rely on quick taps? Do we need to get the ball into the hands of our key players more or make a better effort to stay away from a certain player / unit in their team?  … these are all strategic considerations that can enhance or ruin our chances of scoring.
  • Focused roles – more than our individual strengths, consider your best role in attack. Are you a play maker who sees opportunities and passes well off both hands? A power runner who can make holes and drag several defenders in? A speedster who can burn defenders with pace and/or step around them? A strike runner who has a well-timed crack at space in the line? Or an equally-vital support specialist who does more than ‘hit rucks’, recognising when others are about to break the line, getting into good positions to call for and receive a pass?   (Maybe a combo of more than one!)

Read Full Post »

[I’ve posted something like this before, but am going to be making of a poster for my team and shared this with someone who was interested. Thought a re-visit wouldn’t hurt!]

So one cold and rainy British Columbia evening when the guys really didn’t want to go outside I said we’ll try a little exercise I did at a conference. The speaker was Gary Henderson, a coach educator from the RFU, and he challenged us to think of the ruck as a ‘failure’ of the principles of the game. Yes, we can win the ruck and go again, but for that moment, we’re not necessarily going forward, support is tied in or waiting for the ball, continuity not certain, and the pressure might be off the defending team if they’ve now got a chance to re-align. So, he asked, what can you do to avoid that situation?

I’m now humbled to say we only came up with six, eight with some prompting to be more specific. So with that challenge, I asked the guys to better that. I didn’t give answers, but kept drawing out of them more specific options with questions.

I’m still fine-tuning this for my purposes, but I was really impressed with what we did … then they felt excited and went out in the sleet and mud to try some of these things.

1. Player, ball in two hands, running at space
2. Evasive footwork when contact possible / space closed
(I’m fine-tuning with swerve, side-step, cut as more specific options in different circumstances)
3. Dummy pass to throw defender off and re-open space
4. Pass when space isn’t present, especially when team mate has space (this could be a first option if I receive and there is no ‘easy’ space to exploit)
5. Fend (includes shifting the ball out of two hands for the first time) to fight defender when they close down
6. Power step to hopefully power through the would-be tackler (change of direction from the midline to throw defender off-balance and go through ‘branches’ instead of ‘trunk’ of the tree)
… contact initiated now … so this branches in two ways …
7. Offload
a. Screen pass
b. Around the body
c. While falling
d. From the ground
(or)
8. Hammer / Latch through contact (partner joins to hopefully plow through, or secure as we go into a maul or maybe a ruck)
9. Long placement on the ground (we reasoned that both a ‘jackknife’ or ‘pencil’ long placement of the ball can precede a ruck if someone’s there to play / move it quickly)
10. Ruck / Maul

So the ‘in-between’ stuff is what we work on a lot, in game-like settings. I don’t stress Gary’s word “failure” after using it for initial shock value, because rucks are part of the game and we have to win that contest. Before that, however, let’s really be conscious that we’ve got a dozen options before we have to resort to to a ruck, so we have to give ourselves the time to scan, think, communicate and coordinate those options. It’s important – vital, actually – that I put them in situations where they can practice these under match conditions so they can adapt to realistic pressure and get their timing right, together as attacking units.

Read Full Post »

I’m one who favours defending square and with coordination being more important than quickness. This ensures integrity of the line, without anyone rushing ahead of another or having to rely too heavily on a team mate. Staying square means you can defend off either shoulder and make easy adjustments as attacking players do.

Most, if not all, of the attack solutions found in the Drift and Blitz defence posts can be used against flat, man-on-man defences. In some of the video examples, you can see how teams started square, but then had to resort to a drift, otherwise turned their bodies to chase an attacker, or one player shot up ahead of his / lagged behind team mates. With coordination and trust being vital to effective defence, attackers should consider ways to break this and find opportunities for themselves or their support runners. This doesn’t require fancy, multi-faceted moves with decoy runners. It can be done with a simple dummy pass and/or sudden change of direction. I don’t know if there’s a ‘non-negotiable’ rule for any of these, but players should be trying these things out in training in natural 4v4 games in realistic conditions so they can work out what works for them. Some key reminders should be to keep the ball in two hands to always remain a threat, to keep changes of direction sudden and sharp, to aim for shoulders to draw attention.

Supporting players have to be especially proactive a they’re the ones who have a wider view of how defenders in line react to what the ball carrier’s doing. Too often, I see ball carriers – to their credit – trying to make things happen, but see their supporting players hanging back expecting to be given a golden pass. I think, more often, they have to go looking for space that’s created, defenders whose attention is drawn away from them, or to make an early call to the ball carrier regarding better options. A short while ago I read a great interview with World Cup-winning legend Jonny Wilkinson who said:

I remember coming off the pitch at Twickenham and doing TV interviews with the media being very flattering and I was feeling like a fraud, thinking: ‘Are you kidding me? I’m not a genius — I just heard someone say give him the ball, so I gave him the ball!’ My best-looking games were when someone was in my ear for 80 minutes telling me what to do.”

I figure if one of the greatest fly halves of all time can say that, then certainly decision makers at every level should be demanding more from their support. The decision-maker’s arguably more different task given that he won’t have a Will Greenwood outside him/her is to know what angles, dummy passes, decoy runners, etc. do to defences, quickly consider the advice, and pick the best option for what he/she sees in front. It’s another reason I think we need to play more realistic games at training, because this is rugby. Training against passive defenders – or no defenders at all! – will not allow players to develop these skills. And I challenge all my players, from props to full backs, to be able to step into that position and make a good decision based on what they see and hear.

So, after that long-winded introduction, how can we disrupt or manipulate well-organised defences? Let’s look at some examples:

Each of these two-man moves can be done anywhere on the pitch – in wide open spaces, or close to ruck. While more support might be needed to score, the aim here is to breach the defensive line. (I’ll cover support options and lines of pursuit in a later post, though I think the lines people take are often fairly easy to spot at ground level – Go for the space and move away from the threat!)

2 v 2 Options

The first is an example of a classic Unders Line, where it’s important that the ball carrier stays straight, to fix the defender, and that the supporting runner’s directional change is sudden and sharp. If the defender covering the ball carrier is properly fixed, the strike runner can aim for the space behind his shoulder, ensuring that he gets away from the man covering him. The Overs Line is pretty much the opposite, with the strike runner flaring outward instead of inward, aiming for the space behind the third defender or off the shoulder of his if he’s turned inward. Of course, the pass is different for each – soft and flat for an Unders, and hard and wide (maybe slightly deep, but definitely in front of the runner’s hands).

The second example is often called a Y-Line these days, with the ball carrier making the sudden move. He aims for the space behind the defender beside the defender covering him. This sudden and sharp angle either allows him to slip behind that defender or draw his attention. It should be a win-win scenario if done properly. If the defender stays on his man, he can exploit the space and get behind the defence. If the defender bites, he can pass to a supporting runner who picks a tight line behind the back of the turned defender. This is usually seen going out, but can also be done on the inside if there’s enough width.

The third features a classic loop. Some people think the receiver should pop back to the passer on the inside – before she goes around – while others have the receiver pop when she’s gone around and is straightening up into the gap. I don’t mind either way, but think that each depends on how soon the receiver got the ball, how much space is in front, and what the passer intends to do when she gets the ball back. Some teams use the looping player as a decoy / distributor to pull even more defenders out of line. Other scenarios would have the looping player strike into an open gap between the second and third defenders. Ideally, the looping player would keep both options open!

I might go into them in greater detail later, but you can combine both Unders and Overs lines together in what are called Blocker and Slider moves to really open well-disciplined defences, but I think at amateur levels, the above are usually quite effective.  That said, the essential element of a complicated move is usually just one move – in a Slider, for example, the second attacker suddenly flares outward toward the third defender. If teams are truly ‘playing rugby’, they’ll assess what that does and simply pick the best way to attack the way the defence reacted to that move.

Read Full Post »

In this second post focusing on simple ways to beat typical defensive styles, I’ll focus on the blitz defence. It’s also referred to as a ‘rush’ or an ‘umbrella’ but for the sake of simplicity I’m going to stick with ‘blitz’. This tactic is more recent in rugby’s history, and I’m led to believe it comes from rugby league. London Wasps used to be renowned for it when league legend Shaun Edwards was coach there. In this link from BT Sport’s Rugby Tonight, you can hear Edwards talk about it: [click here]. It does have quite a few limitations and it’s often referred to as a high-risk/high-reward tactic because it can stop teams deep behind the gain line or give them a huge opportunity to break out if not done properly.

Blitz Defence Characteristics:

  • Defenders typically align on the outside shoulder of the attacking player, with the intent on keeping the play contained close to the origin of the play
  • They push up fast looking to make a tackle deep behind the gain line (or go for an intercept), making them vulnerable to side steps
  • Often the outer defender comes forward more than the interior group of three or four, which looks like a gate swinging shut (whereas one could say a drift defence looks like an open gate)
  • In other systems, a central defender shoots up ahead of the rest looking or the big tackle or intercept
  • In both cases at least one defender comes further forward than the rest, leaving space behind that can be exploited by the ball carrier or a strike runner
  • They also tend to leave a lot of space between the rushing group and the full back

Exposing a Blitz Defence:

Exploit the Space Behind

If outer defenders run too far forward, they give a great exit opportunity for the ball carrier. In the diagram, the passer dummies a pass hoping the outside defender sprints up to put a big hit on the receiver, but then slips behind with a sharp angle and a burst of speed. It’s key that the ball carrier run away from his/her defender and and behind the inside shoulder of the next defender. In some cases, that defender recognises this and is able to adjust. This defender is now out of the play allowing the player he was covering to sprint forward and go looking for an offload from the ball carrier.

BLITZ - Dummy and Go

Exploit the “Shooter”

If the pass is made early and a defender “shoots up” ahead of the rest, there’s an opportunity to send someone else from either side in behind. In this situation, the support runner has to run a sharp line aiming for the space behind the defender and make a timely call for a sympathetic short pass.

BLITZ - Shooter

Similarly, when one “shooter” comes forward to cut off a pass or in an overzealous attempt to intercept, a patient passer can hold and pass behind the shooter to a strike runner coming up flat.

BLITZ - Shooter 2

Pass Deep to Get Around the Blitz

As a blitz defence usually only involves a small section of defenders coming forward, there is an opportunity to go around the closing ‘gate’. The team using this option requires patience, quality execution and belief that they can play from deep (a tackle here can mean a costly turnover!). They have to hold their depth and make early and accurate passes with little forward running so they have time to get to the outside. It can be a less-risky option to take, however, if the players leading the blitz aren’t the most agile and if support is present to run into the holes created.

BLITZ - Deep and Around

Pass Over the Blitz

If the defending line is up fast and tight, there is still an option to pass (remember: the aim of a blitz is to contain the ball on the inside and contest from a powerful, go-forward position of strength behind the gain line). In many blitz defences, the wing holds back to cover a kick. If the passer has a good long pass, he/she can try lobbing a quick one to the winger coming up flat over-top the blitzing group. For reference, Quade Cooper often does this, but he has also thrown intercepts or set up the receiver for a big hit when the pass was floated too high, allowing time for a defender to get under.

BLITZ - Over the Top

Kicking Behind the Blitz

The group rushing forward often leaves a big gap between them and the full back, inviting a short kick behind for someone to re-gather. Although a lot of people hesitate to kick as one can be giving possession away, this tactic used more than once early in the game can also cause a blitzing team to ease off, not wanting to give away too much space behind. This is one of the reasons that teams use blitzes more as an occasional / situational tactic rather than a continuous style of defence.

BLITZ - Kick Behind

Finally, there are two more great examples here outlined by Scott Allen from The Roar:

 

Read Full Post »

In recent years, I’ve been avoiding the use of set plays as I’ve too often found that players rely on them too much and end up missing easier opportunities. They also require a lot of rehearsal, which can be a huge waste of time given how infrequently they’re used or when you opt not to use them because the opposition has figured them out. So I’d been putting players in situations and games that forced them to be creative and to consider how best to support the ball carrier/passer. This has been quite successful with teens as most I’ve worked with have a creative spark – and what teen doesn’t like to show off, really? The past two years, however, I’ve been working with men’s sides and have found this more difficult as many are set in their traditional ways. So I’ve been working with them on what I call their personal and team “tool box” – skills and tactics they can use for given situations, the same way a builder picks a certain tool for a specific (or general) job.  [Surely we’ve all used a flat screw driver to open a paint can!]

Another big part of developing analytical and clever decision makers is to put them in typical game-like scenarios and have them assess the visual cues that often appear. This means doing more than 2v1s because, while it’s essentially what breaking down defences comes to, there are so many variables in a line of defenders, that players have to consider a fuller range of options and possibilities.

We always try and attack the ‘easy opportunity’ – things like mismatches in size, speed, or ability, poor alignment, obvious gaps, etc.  Again, for teens this is often simple enough, because in our league there are always ‘exploitable opportunities’ like this. The men, however, are generally more organised, especially as defence is such a major (and easy) focus these days.  So our scenarios therefore have focused on defensive styles and how to beat them based on the inherent limitations or opportunities in their structure (see below). In order to speed up the process of picking the right tool for the task at hand, we brainstormed ideas on how to beat each style and focused on just a few that fell within the team’s knowledge and abilities and which matched our preferred style of play.

Below, and in subsequent posts, I’ll outline some of the ‘tools’ we use for different styles of defence, starting with the classic drift defence.

Drift Defence Characteristics:

  • Defenders align on the inside shoulder and push out
  • Usually space in front on the outside – a tactic used when defending teams out-numbered – with last man hanging back to invite the ball to go wide so they can reduce width and push toward the sideline
  • Susceptible to cut backs on the ‘soft shoulder’ (i.e. inside shoulder, especially if the push becomes lateral)
  • Help from the inside defender is vital to cover the ‘soft shoulder’

Exposing a Drift Defence:

Attacking the Soft Shoulder

As defenders push out, it’s difficult to adjust to someone changing directions against the flow of the push. This is a classic ‘attacking the branches of the tree, rather than the trunk’ moment. A tight line on the inside shoulder might just catch an arm. Too close to the inside defender, and the ball carrier might be caught. If the inside defender is a bit lazy, then there’s a huge opportunity.

DRIFT - Cut Back

Inside Ball to Support Runner

The trick here is that there has to be a reasonable gap between defenders. Again, aided by a lazy inside defender, but not impossible if the timing of the support run and pass is good. The support runner might also expose a different gap than noted below if the inside defender pushes too early onto the receiver, leaving an even bigger gap. If the defenders are disciplined, though, it’s really the space behind the ball carrier’s defender that needs to be attacked.

DRIFT - Inside Ball

Pass Wide and Flat

As noted, drift defences tend to hang back on the outside hoping to force the attacking team toward or even into touch, often accommodating for a lack of numbers out wide. So a simple solution is to get the ball there as quickly as possible. The key element is to get the ball there quickly and relatively flat. If the pass is loopy and deep, the drift pushes out and comes up. Where it’s quick hands or a long and flat miss pass, the flatness of the strike runner will expose the space before the defenders have time to cover it. Drift defences are trying to buy time, so take it away. On the flip side, if the pass is a early, the attackers can preserve width the defenders are trying to close down by straightening up.

DRIFT - Wide

Looping Run

The looping run can be effective if the player looping around is actually quick and if the passer picks a line that effectively blocks the drifting defender. Timing is key here, as if the passer pops to the looping player too soon, s/he’ll likely get tackled from the side by the drifting defender. That said, if the passer recognises this happening, the passer can dummy, hold and go using the looper as a decoy. This situation is made easier for the looping runner if the third attacker moves wide, drawing the third defender. This would present one of those either/or situations that should be win-win … third defender stays on third attacker, and looper has a gap; third defender steps in on looper and s/he passes to the third attacker who should have a massive gap.

DRIFT - Loop

Read Full Post »

I read an insightful article ahead of this weekend’s England v Ireland encounter and wanted to comment on what I feel is a missed opportunity in the England side, but also for a lot of amateur teams still stuck in the past regarding what forwards are meant to do in attack.  From the article:

“FOR ME, THE biggest work-on at the moment – with the tight-five forwards and everyone – is ‘seeing the game.’ It’s all about the decisions people make on the field, under pressure.

“The more you focus on that, the more all the players start ‘seeing it.’”

So said England attacking skills coach Mike Catt of what he’s attempting to achieve with the group of players head coach Stuart Lancaster has identified as good enough to win the 2015 Rugby World Cup.

An intelligent second-five-eighth in his time, Catt wants England to eventually emulate what the All Blacks are doing with their simple, skills-based approach to rugby.
“You look at New Zealand; their tight five can do what their centres do and that’s why everyone else is chasing them,” Catt told Sportsmail. “They have this understanding, an ability to ‘see it’ and make the right decisions at the right time; to do the right things.

“The beauty about what we currently have here is that it’s a young enough team for us to work on developing that.”

There certainly have been signs that Catt’s focused work is bringing about improvements in England’s ability to make more intuitive decisions on the pitch but they remain, for now, a side who rely on a fairly rigid structure in attack.

I’ve been trying the same with the men’s 2nds team I’ve been coaching the last few months.  The message is clear and simple: everyone’s a carrier and everyone’s a decision-maker. Forwards are not just there to crash it up and set up / clear rucks. That sort of thinking is ancient and reduces your team’s potential in attack. Why have just seven or eight players (no. 8s always chosen as players to cross the gain line) when you can have fifteen, and seven more on the bench? Everyone needs to focus on getting through the defensive line or putting someone through the line.

England talk about this a lot, but the bit I’ve bolded is very apparent.  They’re getting forwards into what aren’t ‘pods’ – with a strike runner at the head and two or three ‘support’ players behind (who’re there mostly to ruck or maul). They, as do New Zealand and Australia (probably others) stretch out forwards in what look like mini ‘back lines’ of three our four. The difference between England and New Zealand, however, is what those forwards do with the ball and how they attack.  Currently, in the England team, the guy who gets the ball crashes it up 9.5 times out of 10 (made up stat but seems like pretty much every one, with the odd offload or pass before contact).

All that does is cut off the space that the backs previously had and everyone’s so well drilled in defence these days that they’re not really occupying more defenders to create an over-lap. (This may work at amateur level, but I challenge my players to think on a level that we’re always trying to breach the line, not stretch out phases and hope that the defence eventually collapses in one way or another. Even a few metres gained means the defence has to back up and re-position themselves, which is better than facing defenders who haven’t had to move much at all.)  There are some examples in the article showing England forwards making the extra pass, but I’d argue that the second runner is not really looking to take space, as they still crash it up blindly – and even with a support runner present. The All Blacks and some groups of forwards in the Top 14 are brilliant at moving the ball about in those little units to get beyond the gainline, at least with a half break, not just smash into it and hope to march it back or break a tackle.  I’m a big fan of Lancaster, but I’d like to see England let loose the shackles and make at least one more pass as they’ve got a lot of capable carriers.

For amateur coaches, I challenge you to train and allow your forwards to be more dynamic rugby players – especially if they’re younger and won’t grow into / settle on a position for years to come!  Put all players in realistic situations where they have to work on alignment and scan for, communicate, and exploit opportunities in high-pressure environments.  Below are a couple of scenarios I use before going to a bigger game-like scenario where backs and forwards have to work together in attack.

The first I use with backs and forwards, but can be adapted to just include forwards. The aim is to make that initial break and then support with lines of pursuit that avoids the sweeper(s) – at least a scrum half, if not one other. I like to keep the bags tight so they either have to draw and pass, power step or hammer through and then break out in another gear, fighting through the obstructions to get into good support positions.  With a lot of these activities, I demand players “run in” from the side as if they were arriving to a second or third phase, stressing that creating effective attack starts by getting yourselves into position to exploit / create opportunities – so appropriate width and depth before calling for the ball so attackers can stay straight and have legitimate options left AND right (i.e. players who swing in on an arc invariably angle out, making it easy for defenders to drift).

Shield Wall Breakout

I like this to combine what can become robotic rucking drills, instead giving players a larger contextual sense that the ruck has to be dominant and efficient to provide quick ball for the next phase. I also use this to encourage all players to move the ball from the ruck – note how the tackler rolls away quickly and acts as the half back to get the next phase started (not always realistic, but it certainly encourages tacklers to roll away quickly and get back into the play with urgency!).  That said, the All Blacks are masters at this and it adds to the dynamic of their attack, allowing speedy scrum halves the chance to play in the open field and providing more width. It’s very rare that my team attacks the channel around the ruck, as it’s so heavily defended nowadays, so also reminds everyone that we’re playing from the third defender-out.

Ruck Clean-outs for Second Phase

Read Full Post »

Older Posts »